【圖】RS-366接口定義
(2023/7/15 11:00:00)
RS-366接口定義
RS-366接口定義
公頭
RS-366接口定義
公頭
母頭
| Pin | 信號名稱 | 功能描述 | Circuit EIA |
|---|---|---|---|
| 1 | N.C(懸空不用) | ||
| 2 | Digit Present | A signal given to the ACE indicating that the digit lines contain a digit | DPR |
| 3 | Abandon Call and Retry | An indicator signal from the ACE that it could not make a connection. Could be "busy". | ACR |
| 4 | Call Request | A signal from the DTE that tells the ACE to go "off hook" | CRQ |
| 5 | Present Next Digit | A signal from the ACE to the DTE to indicate that the ACE is ready to receive the next digit. | PND |
| 6 | N.C(懸空不用) | ||
| 7 | N.C(懸空不用) | ||
| 8 | N.C(懸空不用) | ||
| 9 | N.C(懸空不用) | ||
| 10 | N.C(懸空不用) | ||
| 11 | N.C(懸空不用) | ||
| 12 | N.C(懸空不用) | ||
| 13 | Distant Station Connected | Indicator from ACE to DTE that the call is succesfully made. | DSC |
| 14-17 | Digit Signal Circuits | Four lines containing a parallel BCD dial digit (10 digits, plus control digits) | NB1-NB8 |
| 18 | N.C(懸空不用) | ||
| 19 | N.C(懸空不用) | ||
| 20 | N.C(懸空不用) | ||
| 21 | N.C(懸空不用) | ||
| 22 | Data Line Occupied | An indicator that is used by the ACE to let the DTE know that the line it wants to use is used by another device. | DLO |
| 23 | N.C(懸空不用) | ||
| 24 | N.C(懸空不用) | ||
| 25 | N.C(懸空不用) |
瀏覽：(132)| 評論(
0
)
- 下一篇： 【圖】RS-422接口定義
